Español
Français
NOTE: The instructions for use are based on our tests under normal laboratory conditions. Since the conditions of application are not controllable by us, the information does not imply any liability on the part of the company.
Refractory Mortar
Ref.: LRCURV55
Refractory mortar is a product composed of fused cements and special aggregates that provide it with a thermal resistance of 1200ºC.
applications
It is a special mortar for laying refractory bricks and masonry work that will be subjected to high temperatures such as barbecues and paella pans, wood-burning ovens, fireplaces, cookers and repairing boilers or fire areas.
PREPARATION OF THE SUBSTRATE
The substrates must be resistant, rough and clean. In the case of very adherent or porous substrates, it is advisable to dampen them to ensure good adhesion. Do not apply on plaster, painted surfaces, concrete blocks, concrete walls and metal surfaces
INSTRUCTIONS FOR USE
Mix with water and other products, knead preferably using an electric mixer at low revolutions, until a homogeneous, lump-free dough is obtained. This product does not set by itself at temperatures below 1000 ºC.
TECHNICAL DATA
• Appearance: Grey powder
•Particle size: < 2
•Powder density: 1,6 gr./cm3
•Density in kneaded product: 1,9 gr./cm3
PRESENTATION
• 25 kg paper sack.
•Shrink-wrapped pallets of 600 Kg. (24 bagss)
•Shrink-wrapped pallets of 1200 Kg. (48 bags)